Reassemble Dryer Ducting
Once the dryer ducting is cleaned out, you now reassemble the duct.
- Attach an adjustable rigid 90 degree elbow to the exhaust end of the dryer. Do not use a semi-rigid flexible duct as an elbow out of the dryer. As you can see in the photo, the semi-rigid duct can kink when the dryer is pushed back into place, thereby causing a major obstruction to exhaust flow.
- Attach all rigid metal and semi-rigid ductwork sections with a 4" worm-drive stainless steel duct band clamp.
- Turn on gas valve if you have a gas dryer..
- Plug in dryer.
- Make sure lint screen is in place.
- That's it!
