How To Use a Sink Auger
By Bob Formisano, About.com
8 of 8
Prev Next
Rinse Auger Tool then Let Dry and Lubricate Before Storage
Maintenance:
When finished using the auger, rinse it clean making sure to clean the auger bit of any debris. Then let the cable air dry and if possible, spray with lubricant such as WD-40 before storing.
Prev
- Overview and Use of the Sink Auger Tool
- Loosen Setscrew and Extend Cable
- Insert Cable and Tighten Setscrew
- Spin Auger Until You Reach Clog
- Loosen Setscrew, Extend More Cable, Re-tighten Setscrew, Continue Process
- Withdraw Auger Cable and Rinse; Flush Drain
- Auger Use Beyond the Sink Trap
- Rinse Auger Tool then Let Dry and Lubricate Before Storage
Helpful Links
Explore Home Repair
Must Reads
About.com Special Features
Home Allergy Center
Banish mess, reduce allergens, and maintain a clean, healthy home. More >
Home Improvements Made Easy
Inspirational ideas and expert tips to help you pull off your next DIY project. More >
©2009 About.com, a part of The New York Times Company.
All rights reserved.