Installing Eyeglass Lenses for Duct Tape Safety Glasses
By Bob Formisano, About.com
What the Attached Wire Frame Should Look Like Under the Duct Tape
Interim Progress Photo of Wire Frame Attached to Lens
© Robert Formisano 2006Once you have the frame wire slid under the tape strips, it will look similar to the above photo. This is not finished yet, it is simply the interim step of adhering the wire frame to the lenses. In the next step you will wrap and cover the lens edge entirely.
Prev
- Lenses for the Duct Tape Safety Glasses
- Test Fit the Lenses Into the Frame
- Rip Duct Tape for Lens Edge Fastening
- Apply Duct Tape Strip to Lens Edge
- Slide Wire Frame Between Tape and Lens Edge
- What the Attached Wire Frame Should Look Like Under the Duct Tape
- Final Covering of Lens Edge With Duct Tape
- What the Final Edge Wrap Should Look Like
- Completed Lens and Frame Assembly
Explore Home Repair
Must Reads
About.com Special Features
Green Your Clean
Rid your home of grime and harsh chemicals by cleaning with these natural items. More >
Basic Cleaning Supplies
Every home is different, but this basic cleaning supply list is a good starting point. More >
©2009 About.com, a part of The New York Times Company.
All rights reserved.