This tutorial is the third of four modules in How to Make Duct Tape Safety Glasses.
In this module we'll be making the eyeglass temple and earpieces.
Eyeglass Temple Ear Pieces
You'll be using the left and right sections of hanger left over from when you cut out the bottom wire for the eyeglass frame.
- First measure off the length of hanger you need. You want the length to be roughly equal to the width of the eyeglass frame itself.
- Place the curved end of one side of the hanger and align it with the outside edge of the eyeglass frame.
- Next, mark off the other end of the hanger that is the length of the eyeglass frame.
