Once the frame is prepped, the next step is to ready the screening material.
- Clamp the frame to a solid flat surface.
- Cut the screen just shy of the size of the outside of the frame all the way around.
- Align the screen grid to the frame to make sure the screen grids line up straight with the frame.
- Using the convex wheel of the screen installation tool, press the screen material into the top and one of the sides of the frame channels.
- Use short strokes for best results.
- The intent here is to form the metal screen into the frame channels to get it ready for the spline material.
- Roll the screen material into the remaining two channels
